Need help?Do you have a question about the ThermoPro TP-67 and is the answer not in the manual?
General| Temperature Range (Indoor) | 32°F to 122°F (0°C to 50°C) |
|---|---|
| Humidity Range | 10% to 99% |
| Display | LCD |
| Refresh Rate | 60 seconds |
| Wireless Range | 200 feet (60 meters) |
| Power Source (Main Unit) | 2 x AAA batteries |
| Power Source (Receiver) | 2 x AAA batteries (not included) |
| Power Source (Remote Sensor) | 2 x AAA batteries (not included) |
Displays current temperature, humidity, barometric pressure, and weather forecast.
Specifies the operating range for indoor temperature (-20°C to 70°C) and humidity (10% to 99%).
Specifies the operating range for outdoor temperature (-50°C to 70°C).
Defines the accuracy tolerance for temperature (+/- 1.1°C) and humidity (+/- 2-3%).
Alerts the user when the base station or remote sensor battery is low.
The LCD display includes a backlight for improved visibility.
Features a tabletop and wall-mountable design with a detachable base.
The remote sensor is designed to be rain-proof for outdoor use.
Details battery requirements: 2*AAA for base, 18650 lithium for remote.
The primary display screen showing all weather data and icons.
Displays predicted weather conditions using graphical symbols.
Shows the current temperature measured by the remote sensor.
Indicates a low battery level for the base station unit.
Shows the current temperature inside the base station's location.
Button to activate or deactivate the display backlight.
Indicates a low battery level for the outdoor remote sensor.
Shows the current humidity level inside the base station's location.
Displays the current atmospheric pressure reading.
Button to switch barometric pressure units between inHg and mb (hPa).
Button to switch temperature units between Celsius (°C) and Fahrenheit (°F).
Button to select the weather symbol for forecast display.
Provision for mounting the base station on a wall.
Location for accessing and replacing batteries.
Press to view the past 12 hours of barometric pressure data.
Press to view maximum and minimum recorded temperature/humidity.
Press to cycle through registered outdoor sensors.
Press to turn the display backlight on or off.
Select one of five weather conditions to reflect current weather.
Press to select the desired temperature display unit (°C or °F).
Press to select barometric pressure display unit (inHg or mb).
Press to display barometric pressure records for the past 12 hours.
Display max/min temp/humidity; press and hold to clear records.
Display readings from up to 3 sensors; hold to enter sync mode.
A feature for mounting the remote sensor on a wall.
Button to reset the remote sensor to its default settings.
An LED light on the sensor indicating status like charging or power.
The integrated sensor that measures outdoor temperature.
The port used to recharge the remote sensor's internal battery.
Switch to turn the remote sensor unit on or off.
Slider to set the sensor to channel 1, 2, or 3.
Set the sensor to a specific channel (1, 2, or 3) for communication.
Instructions on how to press the reset button for the sensor.
How to turn the remote sensor on/off by holding the ON/OFF button.
Place the remote sensor near the base station to initiate pairing.
Insert batteries into base station; RF indicator flashes for 3 mins.
Set the channel selector on the remote sensor (1, 2, or 3).
Press and hold the ON/OFF button on the sensor for 2 seconds.
Re-press and hold CHANNEL button if sync fails after 3 minutes.
Repeat steps to register additional sensors, ensuring different channels.
Press CHANNEL on base station to select a sensor or auto-scroll.
Shows indoor/outdoor temperature and humidity after synchronization.
Display highest (MAX) and lowest (MIN) recorded temp/humidity.
Interprets icons indicating increasing, steady, or decreasing trends.
Press HISTORY to show barometric pressure for the past 1 to 12 hours.
The display graph shows barometric pressure changes over the last 12 hours.
Set current weather condition for accurate future forecasts.
Press the WEATHER button to change displayed weather symbols.
Place base station in a well-ventilated indoor area away from direct heat/sun.
Place sensor on flat surface, indoors or outdoors, protected from direct rain.
Both the base station and remote sensor can be mounted on walls.
Try re-syncing or relocating the units if connection is lost.
Do not subject the unit to excessive force, shock, dust, temperature, or humidity.
Do not immerse the unit in water or expose to excessive moisture.
Do not attempt to remove any screws or take the unit apart.
Do not dispose of the unit in a fire, as it may explode.
Keep the unit and its parts away from children due to choking hazard.
Dispose of the unit legally and recycle when possible.
Operates on a 433 MHz transmission frequency.
The maximum transmit power is 8 mW.
Up to 200 feet in open area; range may be shorter with interference.
Range: -4°F to 158°F (-20°C to 70°C).
Range: -58°F to 158°F (-50°C to 70°C).
Range: 10% to 99%.
Tolerance: +/- 2.0°F (+/- 1.1°C).
Tolerance: ±2% (30-80%), ±3% (below 30% & above 80%).
Base: 2*AAA 1.5V; Remote: 18650 lithium 3.7V.
Device complies with FCC Part 15, subject to two conditions.
Unauthorized modifications can void user's authority to operate.
Tested and compliant with Class B digital device limits for interference.
To Next Page
