Need help?Do you have a question about the ThermoProbe TP9-A and is the answer not in the manual?
General| Temperature Range | -50 °C to 300 °C (-58 °F to 572 °F) |
|---|---|
| Display | LCD |
| Probe Type | Stainless Steel |
| Resolution | 0.01°C |
| Battery Type | 2 AAA Alkaline |
| Battery Life | 200+ hours |
Specifies manufacturer, model, and device type for the TP7-D and TP9-A.
Details the Ex-designation and ATEX examination certificate for the instruments.
Lists the harmonized standards and EU directives the products comply with.
Outlines the manual's scope, covering basic function, use, and safety instructions.
Provides a step-by-step guide for battery replacement and essential safety warnings.
Recommends authorized service for repairs beyond the manual's scope.
Explains how to power the device on/off and navigate through menu selections.
Details how to log stable temperatures and access logged or stored data via USB.
Explains the backlight function and interpretation of device status/error codes.
Describes the structure and meaning of probe assembly part numbers.
Provides step-by-step instructions for replacing the probe assembly.
Lists required equipment and steps to enter calibration mode with password.
Details adjusting temperature points, saving, and important calibration notes.
Covers general safety, use in hazardous areas, and environmental limits.
Addresses electrostatic discharge risks and bonding requirements in hazardous locations.
Explains intrinsic safety principles and battery handling warnings.
To Next Page
