Use
1/ Heating your room: using the Comfort mode
This mode enables you to adjust the right ambient temperature in the room.
2/ Raising the temperature of your room: using the Boost mode
18
WHAT YOU
WANT TO
ACHIEVE
WHAT YOU HAVE TO DO WHAT WILL HAPPEN
Start the
heating.
Press switch B. The indicator on
switch B will light
up.
Set
the right
temperature
Turn temperature knob A to
The heating indicator will come on if the
ambient temperature is cooler than desired.
Wait for a few hours for the temperature
to stabilise.
If the temperature in the room is comfor-
table, the adjustment is complete.
If you are not happy with the temperature,
adjust the knob one click at a time.
The heating in-
dicator will
come on.
Eventually you
should feel comfor-
table with the tem-
perature
WHAT YOU
WANT TO
ACHIEVE
WHAT YOU HAVE TO DO
WHAT WILL HAP-
PEN
Raise the
temperature
of the ba-
throom
Adjust the duration of the Boost mode by
turning knob C to the chosen time.
- On the standard model, the settings re-
commended for optimal comfort are
between 60 and 120 minutes.
- On the fan-powered model, we recom-
mend a period of between 15 and 30 mi-
nutes.
Press the Boost button D to start the
Boost.
At the end of the chosen time, the Boost will
switch off and the heated towel rail will continue
heating in Comfort mode.
Boost indicator D
will light up.
Your heated towel
rail will run at
maximum power
for the period
chosen.
If you have a fan
model, the fan will
operate.