What to do if the room temperature displayed on my Thermor Bilbao Heater is incorrect?
If the room temperature displayed on your Thermor Heater seems inaccurate, allow at least 6 hours for the temperature to stabilize. If the discrepancy persists, you can calibrate the displayed temperature.
Why Thermor Bilbao Heater doesn't heat?
If your Thermor Heater isn't heating, verify that the mode is activated. If using programming, confirm the programmer is in COMFORT mode. Check that the circuit breakers are engaged and that the power cut-off hasn't interrupted power to the device. Also, if the room temperature is already high, the heater might not activate.
How to fix a flashing heating light on a Thermor Heater?
If the heating light on your Thermor Heater is flashing, it could indicate that the temperature probe is disconnected or faulty. In this case, contact your installer.
General| Power Output | 2000W |
|---|---|
| Frequency | 50Hz |
| Color | White |
| Overheat Protection | Yes |
| Thermostat | Adjustable |
| Mounting | Freestanding |
| Heating Technology | Convection |
| Control Panel | Digital |
| Functions | Multiple heat settings |
Device classification including category, water protection, and insulation type.
Key safety warnings for device operation, installation, and use.
Guidelines for device placement, clearance, and connection box location.
Step-by-step instructions for mounting the device's hanging frame.
Mandatory electrical connection standards, wiring, and safety requirements.
Diagram for connecting wires and explanation of pilot wire signals for different modes.
Instructions for attaching the radiator to the wall-mounted frame and securing it.
Description of the control unit, its buttons, and the different display modes.
Instructions for powering the device on, putting it into standby, and activating the display.
Overview of available heating modes: Comfort, Eco, Programming, and Frost.
Steps to activate Comfort mode and adjust the desired room temperature.
Instructions for activating Eco mode and adjusting the reduced room temperature.
Details on the three prestored programs (P1, P2, P3) for automatic heating scheduling.
Step-by-step guide to set the current day of the week and time on the device.
Procedure to assign programs (prestored or custom) for each day of the week.
Steps to activate Frost Protection mode for preventing freezing during long absences.
How the device detects open windows to pause heating and save energy.
How to use the Balance function for optimal comfort and energy saving.
How to interpret the consumption indicator for energy saving and temperature adjustment.
Instructions for locking the device controls and the physical control panel.
Procedure to adjust the displayed temperature to match room conditions.
Steps to reset the device to its original factory default configuration.
Guidance on cleaning the device and handling coolant during disposal.
Troubleshooting guide for common issues like heating problems, display errors, and connectivity.
Details on the warranty period, coverage, exclusions, and requirements for claims.
To Next Page
