3
General warnings
ELECTRICAL CONNECTION
• Make sure to turn off the power before removing the cover to prevent any risk of
injury or electric shock.
• The installation must be equpped, upstream of the appliance, with a bipolar cut-out
device (fuse, breaker switch - 30 mA earth-leakage breaker).
• f the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
• Grounding is mandatory. Always connect the earth conductor of the cable tothe
earth ground wire or connect the earth conductor to the appropriate terminal
identified by the symbol
• Connecting the resistors directly to the network is prohibited.
• This appliance is not designed to be installed at an altitude exceeding 2000 m.
• Theinstruction booklet of this product is available by contacting the after-sales
service. (details at the back of the manual).
EN
To Next Page
Loading...
