To Next PageTo Next PageWhat to do if Thetford Toilet is leaking at the base?
To fix a leak between the closet flange and your Thetford Toilet, first check the flange nuts for tightness. If the leak persists, remove the toilet and inspect the flange height. If necessary, use Thetford spacers to adjust the height to 7/16” above the floor. Finally, replace the flange seal.
How to fix Thetford Toilet that won't hold water?
If your Thetford Toilet won’t hold water, start by checking for and removing any debris from the blade/ball seal track. Also, check the blade/ball seal compression with the mechanism; if the blade/ball seal is worn, replace it.
How to fix a leak at the water supply line of Thetford Toilet?
If you experience a leak at the water supply line connection of your Thetford Toilet, check the connection at the water valve. Resecure or retighten it as necessary. If the leak persists from the water valve itself, replace the valve.
Why is the flush weak on my Thetford Toilet?
To address a poor flush in Thetford Toilets, ensure that pedals or hand levers are held fully open during flushing. A good flush should occur within two to three seconds. If the issue continues, turn off the RV's water supply, drain the toilet bowl, disconnect the supply line at the water valve, and completely drain the toilet’s water supply line.
Why is the pedal on my Thetford Toilet hard to push?
If the pedal or hand lever on your Thetford Toilet is harder to operate than normal, apply a light film of Thetford Toilet Seal Lubricant & Conditioner or silicone spray to the blade/ball.
What to do if Thetford Toilet vacuum breaker leaks?
If the vacuum breaker on your Thetford Toilet leaks while flushing, replace the vacuum breaker or the water module, depending on your specific model.
General| Type | RV Toilet |
|---|---|
| Material | Plastic |
| Weight | 9.5 lbs |
| Bowl Size | Standard |
| Bowl Shape | Round |
| Color | White |
| Seat Material | Plastic |
| Waste Tank Indicator | No |
| Lid | Yes |
Illustrates step-by-step flushing procedures for different models using hand or pedal.
Guide to locate and record the product ID and serial number for warranty purposes.
Addresses leaks, water retention problems, operational difficulties, and poor flushing with repair steps.
Provides instructions for draining the toilet and using antifreeze for winter storage.
Lists necessary tools and specifies plumbing requirements for proper toilet installation.
Step-by-step guide for installing the RV toilet, including flange sealing and securing the unit.
Outlines the process for removing an existing RV toilet, reversing installation steps.
Recommends specific products and methods for deodorizing and cleaning RV toilets to avoid damage.
Describes available options like the toilet riser and hand spray, and their compatibility.
Provides detailed measurements for various RV toilet models (Aqua-Magic V, Bravura, etc.) in high and low profiles.
Visual representation of parts for different RV toilet models, aiding in identification.
A numbered list detailing each part of the RV toilet, essential for ordering replacements.
