Thetford C262CWE - C263 S Floor and Wall Connections

11
C263S
Floor
The C260 must be screwed to a flat and stable floor
A
ngle back wall
-
floor
6.2
6.26.2
6.2 Floor connection
Floor connectionFloor connection
Floor connection
Mount the toilet to the floor with four screws.
Screw type
Screws are supplied by Thetford
Screw positions
See the installation drawing of the applicable toilet (1.4)
Required torque
1.2 ± 0.3 Nm for a Plywo
od floor
Torque may differ if the floor is made from a different material.
6.3
6.36.3
6.3 Wall connection
Wall connectionWall connection
Wall connection
First connect the toilet to the floor and then to the inside wall.
Connect the toilet to the wall with three screws.
Screw positions
See
the
installation d
rawing of
the
applicable toilet (
1.4)
Required torque
0.9 Nm