Thetford C262CWE - C262 CWE Floor and Water Fill Door Connections

6
C262CWE
Floor
The C
260
must be
screwed
to
a flat and stable floor
Angle back wall
-
floor
4.2
4.24.2
4.2 Floor connection
Floor connectionFloor connection
Floor connection
Mount the toilet to the floor with four screws.
Screw type
Screws are supplied by Thetford
S
crew positions
See
the
installation drawing
of the
applicable toilet (1.4)
Required torque
1
.
2 ± 0.3
Nm
for a Plywood floor
Torque may differ if the floor is made from a different material.
4.3
4.34.3
4.3 Water fill door
Water fill doorWater fill door
Water fill door
First c
onnect the toilet to the floor a
nd then
install
the waterfill door
. Install the waterfill door
with four screws. For further instructions see the installation instructions of the door.
Extra cut
-
out
outside
wall
A cut
-
out need
s
to be created in the
outside
wall for
the
waterfill door
.
Dimensions cut
-
out
See
the
installation drawing of
the
applicable toilet (1.4)
Screw type
Screws are supplied by Thetford
Required torque
0.5 Nm