For professional sevice personnel, this products can be used in the case of nondisassemble
or damage the instrument, used to detect the blind zone. Can be applied to instrument
testing, engine maintenance, vehicle repair, pipe inspection, building inspection and air
conditioning evaporator inspection and so on.
Operating environment
Input voltage
Snake tube In the air: -10°C to 80°C
Device
In the air: -10°C to 50°C
Humidity
Protection class
DC 5V
10% to 90%
Do not operate in the rain
Do not operate in liquids
Application Environment
Important safety matters
• Please don't use our camera with other manufacturers monitor, even same interface.
• Don't use the product in certain areas where it may be exposed to a wire or charged area.
The exposed metal parts can be electrically conductive and may cause unexpected
accidents.
• Don't allow children to operate the product separately, prohibit the use of the product for
medical or human testing.
• Keep the product clean, avoid exposure, or be in direct contact with water, oil and corrosive
liquids.
• It is whole device is not waterproof.
• Confirm that the dial is returned to the neutral position to pull out the snake tube, forbid to
rotate the dial roughly.
• Forbid to twist and pull the curved body at the front of the snake tube.
• Please take it lightly, don't overturn the tube, the Bending limit is one circle.
• Please use the original USB cable charge.
Precautions
To Next Page
Loading...