Warning: This product is an industrial endoscope inspectioncamera, which is not suitable for
medical purposes or human body inspection. The temperature of the probe should not exceed
176℉/80℃.
The ES401 of Steering Endoscopes is an important product for the global
car aftermarket. lt is specially used to detectnarrow bending spaces that are
difficult to enter, such as car evaporator, combustion chambers, and
three-way catalytic sensors. The product has a unique temperature
protection function and is equipped with a two- way 180° steering detection
function, which allows users to take small probes into a small space, and
transmit vivid, clear and all-round video and pictures to the 5 inch Screen.
Meet your diverse inspection needs with advanced extendedaccessories
and real-time temperature display.
!
Fault phenomenon
No power on
Automatic shutdown
TF card prompt error
No charge
Image blur
TF card record failed
Cause analysis Resolvent
Battery feed
The battery is low, and
automatic shutdown is set
TF is not installed properly
Dirty charging interface or
poor wire
Dirty lens
Insufficient TF card capacity
Charging the endoscope
Charge the endoscope
and turn it off automatically
Reinstall TF card
Replace the charging cable
Take a cleaning cloth to
clean the lens
Replace TF card, or clean
up files
Troubleshooting
To Next Page
Loading...