Need help?Do you have a question about the Thinkkitchen Robot culinaire and is the answer not in the manual?
General| Brand | Thinkkitchen |
|---|---|
| Model | Robot culinaire |
| Category | Food Processor |
| Language | English |
Follow all operating instructions before initial use of the food processor.
Replace damaged cords by qualified personnel to avoid hazards.
Disconnect from power before assembly, disassembly, or cleaning.
Turn off and disconnect power before leaving unattended or changing parts.
Prevent contact with moving components during operation.
Protect against electric shock by not immersing electrical parts in water.
Use only manufacturer-supplied attachments to prevent fire or injury.
Never leave the food processor operating without supervision.
Keep the cord away from hot surfaces and edges to prevent damage.
Do not immerse base unit, plug, or cord in water to prevent injury or damage.
Exercise caution when handling sharp cutting blades during use and cleaning.
Supervise children and infirm persons closely when appliance is in use.
Appliance not for persons with reduced physical/mental capabilities without supervision.
Ensure children do not play with the appliance.
Ensure speed selector is at '0' (off) and unplug before disassembling.
Do not place appliance near hot gas or heated ovens.
Never insert objects into the appliance's outer case openings.
Operate the appliance solely for its intended purpose.
Avoid pouring boiling water into the bowl to prevent damage.
This appliance is designed for household use exclusively.
Do not attempt to remove parts like screws from the appliance.
Never operate with an empty bowl or remove lid before blades stop completely.
Maximum operating time is 20 seconds; allow 2 minutes rest between uses.
Do not touch cutting blades or insert objects while the processor is in operation.
Never pour boiling liquids into the food processor bowl.
This appliance is not designed for outdoor use.
Keep fingers clear of the discharge opening to avoid injury from moving parts.
Always use the food pusher and never feed food by hand.
Handle blades with extreme care due to their sharpness.
Keep hands and utensils away from moving blades to prevent injury.
Ensure blade or discs are placed on base only after bowl is properly in place.
Ensure the lid is securely locked before operating the appliance.
Do not attempt to bypass or disable the cover interlock mechanism.
Use the polarized plug only in a matching outlet; do not modify.
Inspect all parts for damage before use; return product if damaged.
Handle steel blade and slicer with caution, keeping fingers clear of edges.
Wash all parts except the base in warm soapy water before the first use.
Align the drive shaft with the base mount and push down.
Slot the bowl onto the base and rotate clockwise to lock it.
The processor will not function if the bowl is not properly aligned.
Your food processor includes slicing and grating cutters.
Place the steel blade over the drive shaft and center post correctly.
Slot the lid onto the bowl and rotate clockwise to lock it.
Connect the food processor into mains power.
Cut food into small pieces and feed through the tube, use plunger.
Choose speed (1-low, 2-high) or Pulse (P) for processing.
Turn power off and unplug once chopping is complete.
Slot cutter over disc, then attach disc onto drive shaft.
Lock lid, connect power, then prepare and add food for slicing/grating.
Use plunger to gently push food down while processing.
Turn off, unplug, remove lid, then lift out cutter disc and cutter.
Carefully wash the cutter, cutter plate, and bowl in warm soapy water.
Install blade or cutters before starting chopping, slicing, or grating.
Never insert fingers or other objects into the feeder tube.
Power off and empty the bowl when it is full of food.
Do not chop over 20 seconds; allow 2 minutes rest between uses.
Utilize the 'P-Pulse' setting for optimal processing results.
Do not pour more than 400ml of liquid into the bowl.
Cut meat into 2cm cubes (max 400g) and process for 10-15sec.
Cut vegetables/fruits into 2cm cubes (max 600g) and process for 10-15sec.
Always unplug the appliance from the power socket before cleaning.
Never run the processor with an empty bowl to prevent motor damage.
Boiling liquids should not be added to the food processor.
Do not immerse the base, power cord, or plug in water or liquids.
All parts except the base can be washed in warm soapy water.
Never place fittings in a dishwasher as this could cause damage.
The base can be cleaned using a damp cloth only.
Do not use abrasive cleaners or materials that may damage the finish.
Allow parts to dry naturally; do not use high heat sources.
Disconnect from power, dry all parts, and store in a safe, dry location.
Check lid and bowl lock alignment if the unit does not start.
Reduce food quantity in the bowl if blades or cutters are not working.
Ensure lid locks are fully engaged if the unit stops during use.
Reduce food quantity and ensure unit is on a stable surface.
To Next Page