thomann Botex LED Stripe All-in-One Control - Page 14

1. Open the main menu.
2.
Navigate to ‘Setting è IR Remote’.
3. Use [Up] and [Down] to select ‘On’ or ‘O’ .
4. Conrm your selection with [Enter].
ð
The remote control is activated (On) or deactivated (O).
1. Open the main menu.
2.
Navigate to ‘Setting è Factory Reset’.
3. Press [Enter].
4. ‘Reset Now’ appears on the display
5. Conrm with [Enter].
ð
The device is reset to the factory default settings.
1. Open the main menu.
2.
Navigate to ‘System Info è Firmware’.
3. Press [Enter].
ð
The current rmware version is displayed.
1. Open the main menu.
2.
Navigate to ‘System Info è Operation Hours’.
3. Press [Enter].
ð
The operation hours are displayed.
Setting the IR remote control
Resetting the device to factory
defaults
Displaying the rmware version
Displaying the operating hours
Operation
14
LED Stripe All-in-One Control
DMX Controller