Need help?Do you have a question about the thomann the t.racks DSP 4x4 Mini Pro and is the answer not in the manual?
General| Audio Channels | 4x4 |
|---|---|
| Outputs | 4x XLR |
| Sampling Rate | 48 kHz |
| Bit Depth | 24-bit |
| Output Impedance | 100 Ohms |
| Frequency Response | 20 Hz - 20 kHz |
| Dynamic Range | >110 dB |
| Crossover | Yes |
| Limiter | Yes |
| Inputs | 4 x XLR |
| Input Impedance | 10 kOhms |
| THD+N | <0.005% |
| EQ | Parametric EQ |
| Delay | Yes |
| Connectivity | USB, Ethernet |
| USB | USB |
Provides an overview of the meaning of symbols and signal words used in this document.
Defines the device's intended application and specifies user abilities required for safe operation.
Covers DANGER notices regarding risks to children and dangers from electric current.
Illustrates device-to-PC connection via USB and advises on cable management.
Shows two different methods for attaching rack angles for proper device mounting.
Explains the front panel inputs, preset buttons, USB interface, and power switch/LED.
Details the back panel power socket and output connections, including preset switching.
Step-by-step guide for installing and starting the PC control software.
Instructions on how to properly close the control software application.
Identifies and explains the main areas and elements of the software interface.
Explains the functionality of each menu item within the control software.
Details the functions of buttons for device marking, preset management, saving, and recalling.
Illustrates and describes the gain settings for input and output channels within the software.
Clarifies the display and control areas for adjusting gain, mute, and phase settings in the software.
Shows noise gate settings including threshold, attack, hold, and release parameters in the software.
Explains display and control areas for setting noise gate parameters like threshold and attack in the software.
Illustrates compressor settings including limit, threshold, ratio, knee, attack, and release in the software.
Details display and control areas for adjusting compressor parameters like threshold, ratio, and knee in the software.
Shows output delay settings and options for measuring units (ms, m, ft) in the software.
Explains how to view and adjust delay times for output channels and select measurement units in the software.
Shows input-to-output channel interconnections and routing options within the software.
Describes how to view and modify input-to-output channel routing and levels in the software.
Details parametric equalizer settings for output channels, including frequency, Q, gain, and filter types.
Explains adjusting EQ parameters, using bypass, and setting input channel levels and phase in the software.
Lists power supply requirements, physical dimensions, weight, and operating environment conditions.
Provides details on stereo capabilities, digital features, delay, EQ, limiter, and computer remote control.
Explains the importance of correct cable and plug selection for optimal sound quality.
Discusses the principles of balanced and unbalanced signal transmission and their suitability.
Details the pin assignments for 1/4" TRS phone plugs and XLR plugs.
Provides guidance on environmentally friendly disposal and recycling of packaging materials.
Explains how to dispose of the old device according to WEEE regulations and local guidelines.
To Next Page
