Assembling the rack
CAUTION!
Danger of cuts on hands and ngers
When connecting the parts, take care for sharp edges on the metal tubes, screws etc.
1. Attach the horizontal connection tubes (5, 6) to the lateral support tubes (1, 2).
2. Then tighten the mounting screws with the drum key (23).
1. Attach the three side crossbeams of the rack (7, 8, 9) in the provided mounting clamps.
2. Attach the support tubes (3, 4) for the crossbeams to the provided mounting clamps. Make sure that the ends of the sup‐
port tubes (3, 4) are resting on the oor.
Assembly
e-drum set
8
To Next Page
Loading...
