Mounting pads on the rack
1. Attach the supplied L-pieces (box "Accessory") to the five pads. First, tighten the wing nuts on the pads by hand.
2.
Then slide the plastic ends of the L-pieces up to the stop into the designated terminals on the rack, see
Ä
‘Assembling the
rack’ on page 7.
3. Align the pads on the rack to meet your needs, then tighten the wing nuts of the pad brackets and the bolts of the pad
terminals on the rack evenly.
Mounting cymbals on the rack
Assembly
e-drum set
10
To Next Page
Loading...
Need help?
General