thomann MPS-600 - Mounting E-Drum Pads and Snare

Mounting pads on the rack
Mounting the pads:
Mounting the snare:
1. Attach the supplied L-pieces to the pads / to the snare. First, tighten the wing nuts on the pads / snare hand-tight.
2. Then slide the plastic ends of the L-pieces up to the stop into the designated terminals on the rack.
3. Align the pads and the snare on the rack to meet your needs, then tighten the wing nuts of the pad brackets and the bolts
of the pad terminals on the rack evenly.
Assembly
MPS-600
9