thomann MPS-600 - Page 8

6. Connect the side arm (L1) with the terminal on pipe (L1) and tighten the screws of the terminal with the drum key evenly
hand-tight.
7. Connect the side arm (R) with the terminal on pipe (R1) and tighten the screws of the terminal with the drum key evenly
hand-tight.
8. Connect the short side arm (L2) to the terminal on pipe (L1) and tighten the screws of the terminal with the drum key
evenly hand-tight.
9. Position the rack horizontally and vertically to suit your needs and tighten all terminal screws with the drum key firmly and
evenly.
Assembly
e-drum set
8