What to do if my thomann SP-120 has no sound?
If your thomann Musical Instrument isn't producing any sound, ensure the volume is appropriately adjusted. Also, verify that headphones aren't plugged in, as this will mute the speakers. Finally, check the function menu to confirm that the built-in sound system is activated, indicated by ‘Local On’ on the display.
Why does my thomann SP-120 malfunction when using a mobile phone?
If your thomann Musical Instrument malfunctions when using a mobile phone, it's likely due to interference. To resolve this, either turn off the mobile phone or ensure it is used at a safe distance from the digital piano.
Why does my thomann SP-120 make a popping sound when turned on or off?
The 'pop' sound you hear from the speakers when switching your thomann Musical Instrument on and off is normal, so there is no need to worry.
General| Type | Digital Piano |
|---|---|
| Keyboard | 88 keys |
| Key Action | Hammer Action |
| Polyphony | 64 voices |
| Sounds | 12 |
| Effects | Reverb, Chorus |
| Metronome | Yes |
| Built-in Speakers | Yes |
| Speaker Power | 2 x 10 W |
| MIDI Connectivity | Yes |
| Headphone Outputs | 2 |
| Modes | Dual, Split |
| Connections | USB |
| Included Accessories | music rest |
Details on obtaining additional information via website resources and customer service.
Explanation of symbols, lettering, and display conventions used in the manual.
Overview of danger, caution, and notice symbols and their meanings.
Specifies the intended purpose and limitations for using the digital piano.
Step-by-step guide for connecting the digital piano to a power outlet.
Instructions and precautions for powering the device using batteries.
Diagram illustrating the main components and assembly points of the digital piano.
Description of the headphone output and its function.
Information on connecting and using the sustain pedal.
Details on connecting the piano to a PC for MIDI and audio data transfer.
Guide to connecting the piano's audio output to external sound systems.
Details on selecting different instrument voices via dedicated buttons on the control panel.
Function of the BANK button to change sound banks.
Diagram and description of the rear panel connection ports.
Interface for connecting the digital piano to a computer.
Port for connecting the sustain pedal.
Output sockets for connecting to external audio devices.
1/4" jack socket for connecting headphones.
DC12V1A port for connecting the AC adapter.
Instructions for powering the digital piano on and off.
Explanation of the automatic power-off function and how to activate/deactivate it.
How to adjust the volume using the dedicated control knob.
Guide to adjusting the keyboard's touch sensitivity levels.
Overview of master tuning and MIDI configuration options.
Procedure for adjusting the master tuning frequency.
Details on configuring MIDI output channel and other MIDI settings.
Function of the panic button to reset MIDI controllers.
How to enable/disable the internal sound system for MIDI controller use.
Steps to restore the piano to its original factory settings.
Guide to choosing from the 12 built-in instrument voices.
Instructions for playing the 12 built-in demo songs.
Overview of available digital sound effects.
How to adjust the Reverb and Chorus effect intensities.
Instructions for adjusting bass and treble using the equalizer.
How to turn the metronome on/off and set its tempo.
Procedure for adjusting the metronome's volume level.
Guide to setting the metronome's tempo (BPM).
How to transpose the pitch of the entire keyboard.
Instructions for layering two voices simultaneously.
How to adjust the volume for the primary voice in layer mode.
How to adjust the volume for the secondary voice in layer mode.
Guidance on proper disposal of packaging materials.
Instructions for the correct disposal of batteries.
Information on how to properly dispose of the electronic device.
To Next Page
