7
Troubleshooting
In the following we list a few common problems that may occur during operation. We give you
some suggestions for easy troubleshooting:
Symptom Remedy
The unit does not work Check the mains connection and the setting of the
mains switch POWER.
No sound 1. Check the position of the rotary control LINE LEVEL or
MIC GAIN.
2. Check whether the SIGN/LIMIT LED lights up green. If
it doesn't, the input signal is too weak or not present.
3. Check for correct connection of the signal cables.
4. Check the signal cables and / or the signal source.
5. Try using another signal cable.
Troubleshooting
active 2 way full-range speaker
26
To Next Page
Loading...
Need help?
General
