thomann the t.amp S-75 MK II - Additional Useful Tips

5.2 Additional useful tips
Depending on the individual application, the amplier can be used in dierent operation
modes:
Stereo mode
The two amplier channels operate independently of
one another, either channel (CH1 and CH2) is amplied
and connected to loudspeakers, the volume can be con‐
trolled separately for the two outputs.
Parallel mode
The two amplier channels receive the same input
signal from channel CH1 and loudspeakers are con‐
nected to each amplier, the volume for both outputs is
controlled by the volume control of CH1.
Bridged mode
Possible operation modes
Installation and starting up
power amplier
26