Need help?Do you have a question about the thomann TSA 4-300 and is the answer not in the manual?
General| Type | Power Amplifier |
|---|---|
| Channels | 4 |
| Power per channel @ 4 Ohms | 75 W |
| Power per channel @ 8 Ohms | 50 W |
| Power @ 8 Ohms bridged | 150 W |
| Frequency response | 20 Hz - 20 kHz |
| THD | < 0.1% |
| S/N ratio | > 100 dB |
| Input sensitivity | 0.775 V |
| Connectors output | Speakon, binding posts |
| Rack Units | 2 U |
| Rack Mountable | Yes |
| Input impedance | 20 kOhm |
| Protection | DC |
| Connectors input | XLR |
| Cooling | Fan |
Alerts regarding choking hazards from packaging and unsupervised use by children.
Warns about electric shock risks from internal high voltages and improper mains cabling.
Advises on preventing hearing damage from high volume and risks of fire from heat sources.
Details load impedance, output power, voltage swing, slew rate, THD, IMD, DIM, crosstalk, and frequency response.
Covers input impedance, sensitivity, damping factor, S/N ratio, cooling, voltage, dimensions, and weight.
Details load impedance, output power, voltage swing, slew rate, THD, IMD, DIM, crosstalk, and frequency response.
Covers input impedance, sensitivity, damping factor, S/N ratio, cooling, voltage, dimensions, and weight.
Details load impedance, output power, voltage swing, slew rate, THD, IMD, DIM, crosstalk, and frequency response.
Covers input impedance, sensitivity, damping factor, S/N ratio, cooling, voltage, dimensions, and weight.
Details load impedance, output power, bridged power, THD, IMD, crosstalk, frequency response, and input impedance.
Covers voltage amplification, S/N ratio, protection circuits, cooling, ventilation, voltage, dimensions, and weight.
Details load impedance, output power, bridged power, THD, IMD, crosstalk, frequency response, and input impedance.
To Next Page