Connect the spray tube using the quick-action coupling on the
appliance.
To do this, hold the connector. Gently insert it into the quick-action
coupling of the suction port until you hear it latch into place.
Püskürtme hortumunun vakum hortumuna tutturulması
Püskürtme hortumunu, vakum hortumundaki tutma klipsleri ile vakum
hortumuna tutturun. Klipsleri tüm uzunluk boyunca eit aralıklarla
daıtarak klipsleyin.
Spray extraction
GB
Connect the correct end of the telescopic wand to the handle of the
suction hose and connect the spray nozzle to the telescopic wand.
Fasten the two clips for the spray tube to the telescopic wand. Clip
the spray tube into the clips.
Latch the spray lever on the handle.
To do this, push the plastic ribs on the spray lever into the recess on the
handle. Make sure the spray lever is correctly locked (see marking).
Close the spray tube of the spray nozzle using the quick-action
coupling on the handle.
To do this, hold the free end of the spray tube of the spray nozzle. Place
this on the stop valve of the spray lever. Lock it by turning the bayonet
catch to the right.
If using the upholstery spray nozzle, connect this directly to the
handle of the suction hose.
Connect the spray lever as described above.
Teleskopik boruyu uygun tarafından vakum hortumunun tutamaı-
na ve zemin yıkama balıını da teleskopik boruya balayın.
Püskürtme borusunun iki tutma klipsini teleskopik boruya tespit
edin. Püskürtme borusunu tutma klipsine takın.
Püskürtme kolunu tutamaa oturtun.
Bunun için püskürtme kolunun plastik kanatçıını tutamakta bulunan
girintiye sürün. Püskürtme kolunun doru olarak kilitlenmesine dikkat
edin (iaretine bakın).
Zemin yıkama balıının
püskürtme borusunu hızlı kaplin üzerinden
tutamaa balayın.
Bunun için zemin yıkama balıının serbest ucunu tutun. Bunu püs-
kürtme kolunun kilitleme valfına yerletirin. Bayonet kilidi saa doru
döndürerek kilitleyin.
Yıkama
Döeme yıkama balıı kullanıldıında, bunu dorudan vakum
hortumunun tutamaına balayın.
Püskürtme kolunu yukarıda açıklandıı gibi balayın.
TR