THOMPSON PUMP C4F-G8352-AS

Need help?

Do you have a question about the THOMPSON PUMP C4F-G8352-AS and is the answer not in the manual?

Summary

Prior to Starting Engine

Manual Operation Settings

Settings for manual engine operation, including throttle modes.

Automatic Operation Settings (Key in Auto Position)

Settings for automatic engine operation based on key position.

Manual Throttle Settings

Automatic Throttle Settings

Linear Throttle

Level;Pressure Maintain Throttle

Pump Monitoring and Safety

Pump Safety Configuration

Configuration options for pump safety alarms and shut downs.

Engine Alarms, Codes and Messages

Engine ECU Alarms;De-Rate;Shut Downs

How the ECU handles engine safety protections, alarms, and fault codes.

Panel Alarm Annunciation and Code Reader

How the panel displays engine ECU trouble codes and indicators.

Active and Stored Engine ECU Codes

Control Panel Specific Alarms and Shut Downs

Control Panel Analog and Digital Inputs

Analog Inputs

Digital Inputs

Digital Functions

Control Panel Relay Outputs

Panel to Engine ECU Communications

Source Address

TSC1 Address

Engine Type

Clutch Configuration

Emissions Monitoring

Emissions Information

Regeneration Process

Levels of Severity

Service Regeneration Level

Regen Inhibit

Scheduler Setup

Setting Up the Weekly Scheduler

Configuration: Engine, Pump, Scheduler, Input

Engine Parameter Configuration

Configure engine-specific parameters like type, speed, and pressure.

Pump Parameter Configuration

Configure pump-specific parameters like transducers and flow rate.

Scheduler Configuration

Input Configuration

Configure analog and digital inputs for various functions.

Configuration: Output and Throttle

Output Configuration

Configure relay outputs for functions like alarms and engine run.

Throttle Configuration

Configure manual and automatic throttle settings.

Configuration: Safety Settings

Engine Safety Configuration

Configure engine safety alarms, de-rates, and shut downs.

Pump Safety Configuration

Configure pump safety alarms and shut downs for inlet/outlet pressures.

Configuration: Module, Display, CAN, Auto Operation

Module Configuration

CAN Configuration

Configure CAN bus communication settings for the engine ECU.

Auto Operation Settings

Configuration: Auto Start

Auto Start Configuration

Configuration: Battery Recharge, Maintenance, Emissions

Emissions Configuration

Configure emissions monitoring and regeneration settings.

Configuration: Clutch and Clock

Clutch Configuration