THOMSON 32E92NH22 - Balance; Volume Curve

Previous: power on according to last status
Pre- frequency
table
HuiZhou/ Poland
Note:Pre-Frequency table(HuiZhou/ Poland)
Reset
Reset EEPROM data, and load the default value of EEPROM
All: clear NVM values，and set to default value。
User: Clear date of NVM in user menu, except the value of
language / related installation/Factory setting, then set to the
default value.
Shop: Clear date of NVM in user menu, include the value related
installation, and Clear date of factory menu except the item
of Balance and sound ,set to default value
TECI command
Note:Priority below basic function of Factory menu
2)． Balance
Item Sub-item
Source For balance source
Note:Switch SOURCE used left/right key
Tone Normal/Warm/Cool
Note: RGB gain range is 0-255
The value of Warm and cool is the
offset of Normal mode, their range is
-128－127, if the offset value beyond
the boundary，set to max or min
value.
Auto Color
Note:display the completed source name
on the right of item,If all the sourcs is
ok ,show “All”
White R R White balance
White G G White balance
White B B White balance
Gray R R Gray balance
Gray G G Gray balance
Balance
Gray B B Gray balance
3)．Sound Volume Curve
Item Sub-item
VOL_0 0
VOL_10 2
VOL_50 14
VOL_90 135
Sound
VOL_100 255
Note:mapping volume value
to 0—255 of the MCU
register