6
EN
General Controls
5
EN
General Controls
Main Unit - Front View
ON/ECO - Press and hold in standby mode to
enter ECO (power saving, without clock display)
mode. Press briefly to turn on and off the unit.
SOURCE - Selects among CD player, USB, memory
card, tuner and AUX.
MEMORY CARD - Slot for inserting memory card.
DISC 1 / DISC 2 / DISC 3 / DISC 4 / DISC 5 -
Direct access to the corresponding disc tray for
playback.
PLAY/PAUSE - Starts and pauses playback for
CD, USB and memory card.
STOP/TUNE/PRESET - Stops CD, USB and
memory card operations, In Tuner mode - selects
tune or preset mode.
OPEN/CLOSE - Opens or closes the disc tray.
SKIP BACKWARD - In CD mode - Goes to
the previous CD track and setting options;
searches backward through CD;
In USB and memory card mode - Skips to the
previous file;
In Tuner mode - Tunes down radio frequency.
SKIP FORWARD - In CD mode - Goes to the
next CD track and setting options; searches
forward through CD;
In USB and memory card mode - Skips to the next
file;
In Tuner mode - Tunes up radio frequency.
BAND/CD INFO - In CD mode - Selects display
options to show track elapse time, track remain
time or disc remain time.
In mp3 / WMA mode - Shows ID3 tag.
In USB / memory card mode - Shows memory
usage.
In Tuner mode - selects radio band.
VOLUME CONTROL - Adjusts volume (except in
navigation mode).
In mp3 / WMA / USB / memory card navigation
mode - Rotate clockwise to navigate downwards
and rotate counter-clockwise to navigate
upwards.
SELECT - In mp3 / WMA / USB / memory card stop
mode - Enters navigation mode.
In navigation mode - navigates forward.
BACK - In navigation mode - navigates
backwards.
RECORD - Starts recording.
DELETE - Removes track from My Selections.
In USB / Memory Card mode - Deletes file from
the connected mp3 player or memory card.
Tips:
In STANDBY mode, press ON/STANDBY to
turn the system on in the previously used
mode. Press SOURCE to select the
corresponding mode. Look at the display icons
to identify the current mode.
Main Unit - Top View
PHONES - Jack for connecting headphones.
DEMO - Activates and deactivates demonstration.
- USB Connector for connecting USB
device (e.g. mp3 player).
Remote Control
ON/STANDBY - Turns power on or off (STANDBY
mode).
SOURCE - Selects among CD player, tuner, USB,
memory card, and AUX.
CD INFO - In CD mode - Selects display options
to show track elapse time, track remain time or
disc remain time.
In mp3 / WMA mode - Shows ID3 tag.
In USB / memory card mode - Shows memory
usage.
PROG - In CD, USB and Tuner mode - Enters
program mode.
INTRO/CT - In CD / USB / memory card mode -
Turns intro mode on or off to play the first 10
seconds of each track / file.
In RADIO mode - shows RDS time.
To Next Page
Loading...
