THOMSON DTI 6021 - User Manual

Questions and Answers

R
Robert ToddAug 19, 2025
How to fix a THOMSON DTI 6021 DVR that is not responding to the remote control?
- C
  courtneysmithAug 19, 2025
  To resolve the issue of your THOMSON DVR not responding to the remote control, try the following: Ensure you press the DTR button on the remote. Point the remote control directly at the DTR, removing any obstacles blocking the signal. Check or replace the batteries in the remote control. If problems persist, reboot the DTR by briefly disconnecting and reconnecting the mains power.
O
oroblesAug 21, 2025
Why won't my THOMSON DVR record anymore?
- C
  Carol BrownAug 21, 2025
  If your THOMSON DVR won’t record anymore, it might be due to a full hard disk. Clear some space on the disk. Also, if an archiving event is in progress, wait for it to finish before attempting to record.
J
Joseph WilsonAug 23, 2025
What to do if the Programme Guide on my THOMSON DTI 6021 DVR is empty?
- H
  hherreraAug 23, 2025
  If the Programme Guide on your THOMSON DVR is empty, leave the DTR plugged in overnight. This allows it to receive the necessary programme information.
K
kjordanAug 26, 2025
Why won't my THOMSON DVR change channels?
- R
  Robert DominguezAug 26, 2025
  If your THOMSON DVR won’t change channels, it could be because two recording events are happening simultaneously. Wait for the recordings to stop, and then try changing the channel again.
B
brianblackwellAug 28, 2025
How to adjust picture shape on THOMSON DVR?
- B
  Brandon McneilAug 28, 2025
  If the picture shape looks wrong on your THOMSON DVR, adjust the DTR settings to match your TV type. Set it to 4:3 for conventional TVs or 16:9 for widescreen TVs.
K
Kevin RobinsonAug 30, 2025
Why does Live Pause not work on my THOMSON DVR?
- K
  Kimberly TorresAug 30, 2025
  If you're experiencing live pause issues with your THOMSON DVR, it could be due to two recording events occurring at the same time. Wait for the recordings to stop. Alternatively, the hard disk might be full, so clear some space to allow the DTR to record.
D
Denise McfarlandSep 1, 2025
What to do if my THOMSON DTI 6021 DVR has no power?
- R
  Robert PhillipsSep 1, 2025
  If your THOMSON DVR has no power or the indicators are not lit, ensure the mains plug is correctly inserted and the power is switched on. Check that the mains socket is operational by testing it with a lamp.
M
Mark SnyderSep 4, 2025
What to do if my THOMSON DVR fails to respond when switching it on?
- C
  campbellsarahSep 4, 2025
  If your THOMSON DVR fails to respond when switching it on, it may be due to corruption of programmes stored on your disk. Perform a reset.
A
April McintyreSep 6, 2025
Why is there no picture on my THOMSON DTI 6021?
- A
  Amber CostaSep 6, 2025
  If you are experiencing no picture or a disrupted picture on your THOMSON DVR, check all connections at the rear of the unit, including the RF IN connection. Ensure the cables to the TV are correctly inserted and select the appropriate AV channel on your TV set.
R
Robert RushSep 8, 2025
Why is there no sound on my THOMSON DTI 6021?
- F
  fullerwilliamSep 9, 2025
  If you are experiencing no sound with your THOMSON DVR, check all connections at the rear of the unit.