THOMSON SpeedTouch 180 User Manual (English)

Other manuals for THOMSON SpeedTouch 180

Questions and Answers:

T
Terry JonesJul 29, 2025
How to improve wireless connectivity on THOMSON SpeedTouch 180?
- B
  Betty MeyersJul 29, 2025
  To improve wireless connectivity or reach on your THOMSON Wireless Access Point: * Move your wireless devices closer to the SpeedTouch™ to get a better signal. Try adjusting the antenna angle as well. * Interference from devices like microwave ovens or cordless phones can be a problem. Try moving either the interfering device or the SpeedTouch™. * Consider changing the wireless channel on the Access Point. * Ensure the antenna, connectors, and cabling are securely connected.
J
Jim MillerAug 2, 2025
Why my THOMSON SpeedTouch 180 cannot be detected?
- E
  Edwin PughAug 2, 2025
  If your THOMSON Wireless Access Point (SpeedTouch™) cannot be detected by a wireless client: * Ensure the distance between the SpeedTouch™ and the wireless clients is not too far. * Verify that the wireless clients are using the same wireless settings (SSID and security settings) as the SpeedTouch™.
J
joseph10Aug 7, 2025
What to do if I cannot connect to THOMSON SpeedTouch 180 Wireless Access Point using the web browser?
- G
  Gabriel SanchezAug 7, 2025
  If you can't connect to your THOMSON Wireless Access Point using a web browser: * Make sure that you have configured the SpeedTouch™ with a valid IP address, subnet mask, and default gateway. * Check that you have a valid network connection to the SpeedTouch™ and that the port you are using has not been disabled. * Check the network cabling between the management station and the SpeedTouch™.
Y
yolanda36Aug 11, 2025
What to do if wireless PC cannot connect THOMSON SpeedTouch 180?
- G
  Glenn TuckerAug 12, 2025
  If a wireless PC cannot associate with the THOMSON Wireless Access Point device: * Ensure that the wireless clients are using the same SSID settings as the SpeedTouch™. * Verify that the security settings are identical on both the clients and the SpeedTouch™. * If using a WPA RADIUS server, confirm that the RADIUS server is active.
T
Tony MoralesAug 15, 2025
How to restore THOMSON SpeedTouch 180 if I forgot password?
- N
  Nicole SmithAug 15, 2025
  If you forgot or lost the password for your THOMSON Wireless Access Point, restore the SpeedTouch™ to its factory defaults.
M
Michelle AlvaradoAug 19, 2025
What to do if LAN LED does not light up on THOMSON SpeedTouch 180 Wireless Access Point?
- A
  Anthony FreemanAug 19, 2025
  If the LAN LED on your THOMSON Wireless Access Point does not light up: * Make sure that the LAN cable is securely connected to the 10/100Base-T port. * Ensure that you are using the correct cable type for your Ethernet equipment. * Check that the computer's Ethernet port is configured for auto-negotiation.
K
Kristin RothAug 25, 2025
Why loop has been detected on THOMSON SpeedTouch 180 in Repeater mode?
- T
  Tiffany HoAug 25, 2025
  A loop detection in Repeater mode on your THOMSON Wireless Access Point is caused by a broadcast storm resulting from incorrect setup.

THOMSON SpeedTouch 180 Specifications

General

Frequency Band	2.4 GHz
Antenna Type	Internal
Connectivity Technology	Wireless
Wireless Standard	802.11b
Ethernet Ports	1 x 10/100 Mbps
Security	WEP
Data Link Protocol	Ethernet, Fast Ethernet, IEEE 802.11b

THOMSON SpeedTouch 180 Setup And User Guide

Table of Contents

Other manuals for THOMSON SpeedTouch 180

Questions and Answers:

THOMSON SpeedTouch 180 Specifications