Indicator lights:
8
Upper zone wash
9
Refill rinse aid
Lower zone wash
Refill salt
BEFORE INSTALLING YOUR DISHWASHER
Before connecting your dishwasher to the power supply, check that the voltage stated on the rating
label of your appliance corresponds to the voltage in your home. The appliance must be grounded. The
manufacturer is not responsible for damages that may occur as a result of usage without grounding.
WARNING: Disconnect electrical power before installing your dishwasher.
INSTALLATION INSTRUCTIONS
Your dishwasher can be installed in various locations in your kitchen as long as there is
space and accessibility to connect your dishwasher tothe water/drainageand electrical
supply.
Do not connect an extension leadto theapplianceto avoid potential safety hazards.
Applying the CondensationStrip
The condensation strip must be fitted tothe underside of the worktop to protect it
against the ingress of moisture.
1. Ensure thatthe underneath of the worktop is clean.
2. Separate the backing paper away from the strip.
3. Stick the condensation strip to the underneath ofthe worktop.
ColdWater Connection
The installation of the hose should be done by professionals.
Connect the supplied water supply hose to athreaded
3/4" connector and make surethat it is fastened tightly
GB-7
To Next Page
Loading...
