THOMSON THVC2318 - Page 36

1,
2.
Disassemble the power brush.
Push
Using flathead screwdriver or coin, turn screw to the ‘unlock’ position.
Disassemble brush roll for cleaning and reassemble after all parts are
completely dried.
pi
Im
Tip: The brush roll and its cover are washable; Ensure they are completely dried
before use.
CAUTION
1. When the dust blocks the air flow of the floor brush, please clean it with a
stick
2. Except for the brush roll and its cover, all others cannot be washed with
water.
3. Do not apply oil to both ends of the brush roll.
4. Do not touch the working brush roll part and stay away from the airoutlet
when in operation.
5. Do not use when wheels or scrubber's nylon loop are damaged.
6. Only to be used with the power supply unit provided with the appliance.
EN-14