THOMSON THVC213120C - User Manual

Questions and Answers

M
Michael PalmerAug 12, 2025
Why does my THOMSON THVC213120C Vacuum Cleaner have no suction power?
- A
  Alan DavisAug 12, 2025
  Several factors can cause a loss of suction power in your THOMSON Vacuum Cleaner. It might be that the dust cup is full, so you should clean it after each use. The filter could be blocked, so remove any dust or debris from the filter. Also, the suction inlet of the brush or another accessory might be blocked, so check for blockages there. Finally, ensure that all components are fully dried after cleaning.
B
bridget03Aug 19, 2025
What to do if my THOMSON THVC213120C Vacuum Cleaner running time shortened?
- W
  William MooreAug 19, 2025
  If you notice that your THOMSON Vacuum Cleaner's running time is shorter than usual, there are a few potential reasons. The battery might need replacing, so contact the shop or after sales service to replace the battery at your own cost. The ambient temperature could be too high or too low, so ensure you only operate your vacuum in a suitable environment. It's also possible the battery isn't fully charged, so allow the battery to charge fully.
J
John Dean Jr.Aug 27, 2025
How to fix a THOMSON Vacuum Cleaner power brush that does not work?
- D
  Danny RomanAug 27, 2025
  If the power brush on your THOMSON Vacuum Cleaner isn't working, it could be trapped by hair or larger debris. Ensure that no hair or other thread is trapped around the brush and check the brush area for larger debris.
C
Connor BradySep 3, 2025
What does it mean if 3 lamps for power indicator flicker on my THOMSON Vacuum Cleaner?
- K
  Kathleen WagnerSep 3, 2025
  If you notice 3 lamps for the power indicator flickering on your THOMSON Vacuum Cleaner, it could be due to a couple of reasons. The rolling bar might be wrapped, in which case you should clean it. Alternatively, the temperature might be too high or low, so move the vacuum to a suitable temperature.