Tips: Choose location close to power outlet. Locate point high enough on
wall to allow wand and power brush to hand freely. Place wall mount
against wall and use pencil to mark drill holes. Drill holes (with 1/4”bit) and
insert drywall anchors. Insert screws through holes on mount and tighten until
firmly attached.
Drywall anchors
Screws
-
Slide wand into main body until it clicks.
-
Push wand into power brush until it clicks.
-
Accessories can be connected with wand When cleaning high
position.
How to connect accessories?
To Next Page
Loading...
