- EN 22 -
Line output:
• This syem can be connected to an external device (for example, an active external
amplier and speaker) via the RCA line output on the rear of the device.
• Use the dual RCA male to dual RCA male cable supplied to connect an external device.
White (G)
Red (D)
White (G)
Red (D)
• If necessary, use the dual female RCA to 3.5mm ereo jack cable supplied for connection
to the 3.5mm jack of an external device.
Technical specifications
Turntable specications:
Operating voltage 12 V DC/1000 mA
Power consumption 0.5 W on andby; 3 W in operation
Dimensions (LxWxH) 450 x 125 x 395 mm
Unit weight 4.5 kg
Drive mode Belt drive
Speed 33-1/3 and 45 rpm
S/N ratio 45 dB
Cartridge type Moving magnet
Cartridge model Audio-Technica AT-91
Turntable Wooden platter, 295mm diameter
External power adapter specications:
Manufacturer name or adapter brand KPTEC
Adapter model number K12V120100G
Input voltage and frequency 100-240V / 50~60Hz
Voltage, current and output power 12V 1A 12W
Average active eciency 82.96%
Eciency at low load (10%) 71%
Power consumption without load 0.1W