Surface Burner Ignition
To light the top burners, push and turn the appropriate control knob counter clockwise to the ‘HI’
position. You will hear a clicking noise–the sound of the electric spark igniting the burner. Once burner
ignition has been achieved, then turn the burner control knob to adjust the desired heat setting.
NOTE: When one burner is turned to the ‘HI’ position, the burner ignition will spark. Do not attempt to
disassemble or clean around any burner while another burner is on. Do not touch any burner cap,
burner base, or igniter while the ignitor is sparking.
Simmer and Boil
1. A smaller flame will give the best simmer results. Small flames offer precise cooking performance for
delicate foods, keeping food warm, melting chocolate or butter, and for cooking that need to cook over
low heat for a long time.
2. The highest (larger) flame settings provide the maximum heat that is available on your range. This
setting should be used for heavy cooking loads such as water boiling or pasta cooking.
To Next Page
Loading...
