Removing and replacing the oven door
Important!
Do not lift the oven door by its handle. Doing so may damage the door.
Make sure the oven and the door are cool before you begin to remove the door.
Before removing the door, make sure there is a large enough clear, protected surface in the kitchen to
rest the door on.
Take care, the oven door is heavy!
When replacing the burners, make sure that the two locating pins on the bottom of the brass flame
spreader are properly aligned with the locating pin holes on the top of the simmer ring.
Incorrect alignment will produce a potentially dangerous flame and poor burner performance.
To Next Page
Loading...
