Temperature selection
The wine cooler has two temperature zones. The temperature setting of upper zone is
adjustable with the range 5-12℃（41-54℉）, which is ideal for storing sparkling and white
wines. The temperature setting of lower zone is adjustable with the range 12-20℃
（54-68℉）, which is ideal for storing white and red wine.
NOTE: both two zones temperature could be set at 12℃（54℉）and it is workable as
the time. But for optimal performance, once one zone is set at 12℃ （ 54℉） , we
suggest another setting for the other zone with 3℃（37℉） difference at minimum
(example : 5℃ （ 41℉ ） upper and 8℃ （ 46℉ ） lower). Maximum temperature
difference between both compartments is 10℃ （ 50℉ ） . Always set cooler
temperature in upper compartment and warmer temperature in the lower
compartment (example: 5℃ （41℉）upper and 15℃（59℉） lower).
● You can touch key “+” (C) and key “-” (B) to set the internal temperature for the selected
zone. The degrees indicators will appear in the display window marked for upper
zone and For lower zone.
● When the unit it plugged in for the first time. The LED readouts will show the original
temperature set previously. Touch the “+”(C) and “-” (B) mark once of each compartment
to set the desired temperature.
● The temperature will increase by 1℃ or 1℉ if you touch the “+”(C) mark once, or
temperature will decrease by 1℃ or 1℉ if you touch the “-”(C) mark once.
Temperature display
To view the set temperature in either zone at any time, touch key H and the set
temperature will temporarily flash on the display for 5 seconds. Then the display shows
the current inner temperature again.
NOTE: when first used or after operating the wine cellar after a long period of inactivity,
the inner temperature will not immediately be the temperature shows on the display.
Indeed, it is necessary to wait a few hours for a temperature adjustment of the wine cellar
in order to have a homogeneous temperature. To avoid excessive condensation when the
ambient temperature is above 28℃（82℉）, do not lower the temperature to below 7℃
（45℉）.
IMPORT: after unplugging , turning off the power or after a power failure, it is
imperative to wait 5 minutes before turning it on again.
Temperature alarm
The alarm will sound and the temperature display will flash when:
- The temperature is on of the zones rises or falls outside the temperature range (5-12℃
To Next Page
Loading...
