EasyManua.ls Logo

Thor Motor Coach Class C - Periodic Maintenance Chart

Thor Motor Coach Class C
97 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THOR MOTOR COACH
CARE AND MAINTENANCE
91
PERIODIC MAINTENANCE CHART
For your convenience, a Maintenance Chart is presented below. For detailed information regarding specific
product service and maintenance procedures, refer to the products respective owner’s manual.
Note: The following chart is a guide only. Service and maintenance intervals may very depending
on product performance, usage, and/or environmental conditions.
Fiberglass Exterior
ITEM
E
ACH TRI
M
P
ON
T
HLY
E
VE
R
Y 3 M
ON
TH
S
E
VE
R
Y 6 M
Y
ON
TH
S
EA
RL
Y
A
S RE
QUIR
ED
PROCEDURE
Fiberglass Exterior
Wash with Warm Water & Mild Detergent
Wax with Liquid or Paste Wax
Roof & Roof Components
Inspect & Reseal as Needed
Lubricate Roof Vent Mechanism with Light Oil & Clean
Lubricate Roof Antenna with Silicone Lubricant Spray
Windows & Doors
Check Vinyl Seals when Washing Exterior
Check Seals for Damage & Repair as Needed
Lubricate Door Hinges & Step Components
Adjust & Lube Window Latches
Lubricate Door Locks & Strike Pocket, Include Exterior
Storage Doors
Seals & Adhesives Inspect & Reseal as Needed
LP Gas System
Check for Leaks & Road Damage
Qualified Service Technician Inspection
Water Drainage
Check Hoses, Fittings & Connections for Leaks & Signs of
Wear
Check Drainage System for Leaks & Road Damage
Sanitize Fresh Water System
Winterize System Depending on Local Seasonal
Conditions
Electrical System
Check GFCI Circuits
Generator Maintenance as Outlined in Generator Manual
Check & Service Batteries
Appliances
Remove Food & Ice from Refrigerator
Clean Fan Blades & Wash Filter on Range Exhaust Hood
Check for Obstructions & Dirt on Exterior Appliance Vents
Safety Equipment
Clean CO, Smoke & LP Detectors
Test All Detectors
Check Fire Extinguisher Pressure & Condition
Carpeting
Vacuum
Clean
Wood Surfaces Clean Pre-Finished Panels & Wood
Seats
Lubricate all Mechanisms & Inspect for Proper Operation
Check all Seat Belt Buckles, Release Mechanisms & Belt
Webbing
Chassis Components
Follow Chassis Lubrication & Maintenance Procedures &
Schedules
Weight & Distribution
Properly Load and Verify Specified Load Limits & Weight
Distribution

Table of Contents

Related product manuals