On the next figure, item A is:
A = 30 inches minimum clearance between the top of the cooking surface and the bottom of an
unprotected wood or metal cabinet; or
A = 24 inches minimum when bottom of wood or metal cabinet is protected by not less than 1/4-
inch-thick flame-retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015-
inch-thick stainless steel, 0.024-inch-thick aluminum, or 0.020-inch-thick copper.
A = 40 inches minimum clearance between the top of the cooking surface and the bottom of an
unprotected wood or metal cabinet, if your used 48-inch dual fuel range.
To Next Page
Loading...
