Preparing and sorting the laundry
14
M---Display
1---Temperature indicator
When a program is selected, the default
temperature value indicator light of this
program will be lit on the display.
You can change the temperature value
by pressing the TEMP. button. There are
five temperature values indicator lights
on the display. When a temperature
value is selected, the corresponding
temperature value indicator light will be
lit on the display. If all temperature value indicator
lights are off, it indicates the appliance using only
cold water without utilized the heater in this
program.
2---SPINNING SPEED indicator
When a program is selected, the
default spinning speed value indicator
light of this program will be lit on the
display.
You can change the spinning speed
value by pressing the SPEED button.
There are five spinning speed values
indicator lights on the display. When a
spinning speed value is selected, the corresponding
spinning speed value indicator light will be lit on the
display. If all spinning speed value indicator lights
are off, it indicates the appliance does not spin after
the final drain process in this program.
3---DOOR LOCK indicator
The lit indicator light indicates that the
door is locked. To prevent any damage,
wait until the indicator light turns off
before opening the door.
To open the door while a cycle is in progress, press
the START/PAUSE button, if the DOOR LOCK
indicator light is off, the door may be opened.
4---CHILD LOCK indicator
The lit indicator light indicates the CHILD
LOCK function is activated, the control
panel is locked.
5---DELAY END indicator
The lit indicator light indicates the DE L AY
END function is activated. The countdown
to the end of the selected wash cycle will appear on
the digital display.
6---ONE TOUCH indicator
The lit indicator light indicates the One
Touch wash program is selected. There are three
ways to set the One Tou c h wash program.
7---RINSE COUNT indicator
When the indicator light is lit, you can
select the rinse count, the selected rinse
count will appear on the digital display.
8---DIGITAL DISPLAY
1) Remaining time of
the wash cycle
2) Delay end time
3) Rinse count
4) Fault code
The display is useful when programming the machine and provides a great deal of information.
To Next Page
Loading...
