Installation
GENERAL CABINET REQUIREMENTS:
• 1⁄4” space is required between the side of the appliance and an adjacent wall
or cabinet door when installed at the end of a cabinet run.
• The cabinet base must be flat and capable of supporting the weight (roughly 90
pounds) of your appliance when in use.
• The appliance door will overlap the furniture below by approx 3/16” when
opened.
• There must be an air gap of at least 1/4” between the appliance and the
cabinet walls when the appliance is installed, i.e. 1/8” each side.
MWO-24
MWO-30
To Next Page
Loading...