Need help?Do you have a question about the Thrane&Thrane Aero-HSD+ and is the answer not in the manual?
General| Model | Aero-HSD+ |
|---|---|
| Network | Inmarsat |
| Frequency | L-band |
| Interfaces | Ethernet |
| Manufacturer | Thrane & Thrane |
Details the minimum system configuration and applicable part numbers for the Aero-HSD+ system.
Illustrates basic system component interconnection and user interface options.
Details the connectors on the SDU, including front and rear receptacles.
Offers guidelines for installing and mounting system components for optimum performance.
Details electrical installation, wiring diagrams, and cable requirements.
Covers wiring for the system with an installed High Speed data Unit (HSU).
Outlines check procedures to be performed during and after installation.
Details the HSD+ Configuration Program for setting up system parameters.
Outlines the sequence of checks for ensuring correct system function.
Lists important installation checks to be performed before inserting LRUs.
Describes checks for system interfaces like voice, fax, ISDN, and MPDS on ground.
Details tests to ensure Aero-HSD+ transmission does not affect aircraft avionics.
Covers functional checks performed while the aircraft is airborne.
Provides hardware and software requirements for updating the system software.
Details status signaling methods and initial troubleshooting steps.
Lists specifications for key system components like SDU, HPA, DLNA, and HSU.
Details DO-160C/D environmental qualification for system components.
Lists cause codes for H+, MPDS, and ISDN communication.
Defines severity levels and lists BITE error codes for system diagnostics.
Lists useful commands for troubleshooting, including BITE list and system log.
To Next Page
