Need help?Do you have a question about the Thrane&Thrane sailor 90 and is the answer not in the manual?
Explains geostationary orbit, satellite movement, and positioning.
Describes Ku frequency band and transponder function for TV channels.
Explains how the antenna focuses signals to the LNB for amplification and frequency conversion.
Discusses linear and circular polarization in TV transmissions and their advantages.
Explains satellite footprints as maps of field strength and their use in estimating antenna size.
Details the antenna's self-test, calibration, search, and satellite identification process.
Details the steps performed during the antenna's internal calibration sequence.
Explains the two search patterns used and signal detection methods.
Explains how the antenna maintains its pointed position using gyroscopes and dish scan.
Describes how the antenna identifies satellites using NID codes and repositions if necessary.
Explains how polarization is set during NID scanning and identification.
Guides on choosing an optimal location for the antenna, avoiding obstacles and interference.
Advises on placement to avoid interference and damage from radar systems.
Provides tables for minimum separation distances from radar based on power and band.
Emphasizes rigid mounting and specifies bolt tightening torque and thread-locking fluid.
Details electrical connections required for power supply, control box, and coaxial cables.
Provides diagrams and dimensions for mounting the antenna on a pedestal.
Shows detailed mounting dimensions and bolt specifications for a deck-mounted pedestal.
Illustrates the connection of the junction box inside the radome to the control unit.
Explains how to mount the control unit and its terminal connections.
Discusses default connections for tracking and ID signals and options for optimization.
Explains how to align the heading indicator and set its offset if needed.
Describes how to program obscured sectors to prevent false locking on reflections.
Provides a step-by-step guide for the initial start-up and configuration process.
Describes the basic operation of selecting a satellite and confirmation messages.
Explains the default menu display and navigation using arrow keys.
Overview of advanced operational settings and controls.
Allows manual control over the polarization setting for the antenna.
Settings for satellite identification, including disabling or using adjacent satellites.
Manual position entry, recalibration, and adjustment of signal tracking threshold.
Makes the USB transparent for direct communication between the ACU and a PC.
Allows adjustment of the control unit's display contrast.
Displays status codes for service and diagnostic purposes.
Controls tracking regulator amplification for elevation and azimuth.
Guides on uploading new software to the antenna using the Service menu and terminal.
Summarizes available commands for controlling the satellite TV antenna system.
Guides on installing the PC software and USB drivers for the antenna system.
Explains how to configure the SatTV.ini file for COM port and UserMode settings.
Shows the main interface of the SatTV PC program for configuration and monitoring.
Details the main menu display, showing signal strength, error, and elevation.
Provides access to calibration, setup, and factory settings if User mode is enabled.
Allows calibration of the Inertial Measurement Unit and programming of obscured sectors.
Displays tracking error indicator and traces for diagnostic purposes.
Records antenna operations like tracking, unwinding, and calibrating when PC is docked.
Lists available satellites with their elevations and azimuth angles for position calculation.
Allows editing the satellite list, adding new satellites, and selecting tracking modes.
Explains different tracking modes (Filter, Tuner, Auto) for satellite assignment.
Details NID codes, symbol rate, frequency, and FEC for satellite identification.
Describes how to edit the satellite list and scan for NID-codes.
Explains how to add/delete satellites and transponders using the SatID menu or editing tool.
Describes the function to search the entire sky for satellites when the ship is at standstill.
Guides on uploading new software to the antenna using the Service menu and terminal.
Overview of maintenance recommendations, warranty, and checks for cables and connectors.
Provides steps for saving settings, disconnecting cables, and replacing the CPU unit.
Outlines steps for disconnecting, unscrewing, and calibrating a new gyro unit.
Details the process for removing and replacing the LNB, including cable notes and O-ring placement.
Describes loosening motor screws, removing the belt, and tightening screws after replacement.
Guides on disconnecting the cable, removing motor screws, replacing the motor, and reconnecting.
Details removing inner bolts, loosening tensioner, sliding belt, and tightening.
Explains removing inner bolts, disconnecting cables, loosening tensioner, and replacing the motor.
Covers loosening mounting plate screws, replacing the belt, and tightening screws.
Guides on disconnecting cable, loosening screws, removing motor, and reconnecting.
Provides steps for stripping cable, soldering centre pin, and crimping connectors.
Lists four-digit hexadecimal error codes and their corresponding fault conditions.
A flowchart to diagnose and resolve various operational issues with the antenna system.
Provides key physical measurements of the antenna, radome, and weight.
Lists performance metrics like elevation/azimuth ranges, velocities, LNB specs, and polarization.
Details the antenna's tolerance and response to ship movements like roll, pitch, and yaw.
Specifies electrical parameters such as voltage, current, and LNB oscillator frequencies.
Lists operating conditions like temperature, humidity, and wind speed.
Lists compliance with Electromagnetic Compatibility and safety standards.
Declares compliance with Low Voltage and EMC directives based on harmonized EU standards.
Lists the specific equipment models covered by the declaration of conformity.
States that the Sailor 90 Satellite TV is a worldwide antenna system.
Provides the manufacturer's name and addresses.
Indicates the location and date of the declaration.
General| Brand | Thrane&Thrane |
|---|---|
| Model | sailor 90 |
| Category | TV Antenna |
| Language | English |
To Next Page
