23
7. Customization
The AVA base has been designed to be customized.
Certain mechanical parts can be replaced in order to
adjust its operation according to your preferences.
Three steps are required:
1. Open up the base (not necessary if you are only
changing masks);
2. Customize the settings;
3. Calibrate the base.
Only carry out the
modifications recommended by
Thrustmaster. Any other
modification of the product
may affect its behavior and invalidate the conformity
with the original safety and performance standards.
Thrustmaster is not responsible
resulting from unauthorized modifications.
Use only approved parts. The use of non-
parts may damage the product and void the warranty.
To Next Page
Loading...
