Thrustmaster Score-A - Gamepad Installation and Setup; Battery Installation Guide; Bluetooth Pairing and Connection

3/8
INSTALLATION
1. Insert three LR03/AAA-type 1.5 V batteries into the battery compartment (11)
located on the underside of the gamepad.
2. Power on your gamepad by setting the power on/off switch (9) to ON.
- The gamepad’s status indicator LED (4) flashes.
3. On your Android™ device, enable the Bluetooth® wireless technology function.
4. Press and hold the Bluetooth® pairing button (5) for three seconds.
- The gamepad’s status indicator LED (4) flashes.
5. Select the THRUSTMASTER gamepad in the pairing list.
If the THRUSTMASTER gamepad does not appear in the pairing list, press
and hold the gamepad’s Bluetooth® pairing button (5) for three seconds
again.
You are now ready to play!
Please note: your gamepad does not include a motion sensor.