Thrustmaster T-GT User Manual

9/24
ATTENTION:
- Do not remove the foam pads located on the underside of the racing wheel’s base! The foam
pads amplify the effects of the T-DFB system when the wheel is attached.
- The textured rubber side of the mounting discs (26) must imperatively be positioned facing
the cockpit shelf = never position the metal side facing the cockpit shelf.
Attaching the racing wheel to a table or a desktop
1. Place the racing wheel on a table or any other horizontal, flat and stable surface.
2. Insert the fastening screw (14) in the attachment system (13), then tighten the device by turning
the screw anticlockwise, so that it feeds into the large threaded hole (12) located beneath the
racing wheel, until the wheel is perfectly stable.
ALWAYS NEVER
WARNING:
- Never tighten the screw alone, without the attachment system in place (this could damage
the racing wheel).
- Do not remove the foam pads located on the underside of the racing wheel’s base! The foam
pads amplify the effects of the T-DFB system when the wheel is attached.

Thrustmaster T-GT Specifications

General

Device type	Steering wheel + Pedals
Reflex vibration	Yes
Gaming control technology	Digital
Gaming platforms supported	PC, PlayStation 4
Steering wheel rotation angle	1080 °
Gaming control function buttons	-
Device interface	USB
Connectivity technology	Wired
Housing material	Leather, Metal, Plastic
Pedals box material	Stainless steel
Steering wheel material	Leather
Power source	Cable
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Package type	Box
Harmonized System (HS) code	95049080

Weight and Dimensions

Weight	- g