Thrustmaster T-GT User Manual

7/24
INSTALLING THE WHEEL ON ITS BASE
Align the connector positions using the arrows:
Base (1) connector: Arrow pointing upwards
Racing wheel (2) connector: Arrow pointing upwards
Once the connectors are correctly positioned, simply rotate the Thrustmaster Quick Release (15) device’s
ring anticlockwise, while holding the racing wheel (2) in position.
Then, tighten the ring as much as you can: to do so, hold the ring in position and rotate the racing wheel
clockwise.
Once you have installed the wheel, rotate it 180° (when facing the wheel, the GT logo should be upside
down) to access the small attachment screw located on the ring of the Thrustmaster Quick Release (15)
device. Use a large Phillips screwdriver to tighten the small attachment screw (do not use excessive
force), turning it clockwise.
When using a Philips screwdriver, ensure NOT to use excessive force
when tightening the small attachment screw!
Stop turning the screw as soon as you feel some resistance.

Thrustmaster T-GT Specifications

General

Device type	Steering wheel + Pedals
Reflex vibration	Yes
Gaming control technology	Digital
Gaming platforms supported	PC, PlayStation 4
Steering wheel rotation angle	1080 °
Gaming control function buttons	-
Device interface	USB
Connectivity technology	Wired
Housing material	Leather, Metal, Plastic
Pedals box material	Stainless steel
Steering wheel material	Leather
Power source	Cable
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Package type	Box
Harmonized System (HS) code	95049080

Weight and Dimensions

Weight	- g