Thrustmaster T248 - Page 17

16/32
Use the directional buttons (7) in this menu as follows:
Navigation Screen Information / Options
8 levels
2 options
XBOX/PC
Select your system:
Xbox console or
PC
- Selection of Xbox console (by default)
- Selection of PC system
Note: To validate your system choice,
press the MODE button (9). Selection
will be saved when EXIT appears on
screen.
3 displays
ABOUT
General information
- Firmware version of racing wheel
base
- Name of device connected to mini-
DIN connector (23)
- Type of pedal set connected to RJ12
connector (24)
3 options
FFB
Select the Force
Feedback profile
(see FFB PROFILE
DIAGRAM section)
- FFB 1
- FFB 2 (by default)
- FFB 3
6 options
FORCE
Select the overall
wheel’s force effect
level
6 options
ROT°
Select the angle of
rotation
(only for games in
which the angle of
rotation is not
automatic)
- 270°
- 360°
- 540°
- 720°
- 900°
- AUTO = Automatic (by default)
2 options
PEDAL
Select the pedal set
configuration
- FLOOR: floor position (by default)
- INV.: suspended position
(the accelerator and clutch pedals are
reversed)
1 display
TEMP
Motor temperature
Racing wheel’s motor temperature displayed
in real time
1 option
RESET
Reset the racing
wheel to default
mode.
- N: No
- Y: Yes
Select Y, then press the MODE button (9).
The racing wheel is reset when EXIT
appears on screen.