Thrustmaster T300 RS - Page 4

Update: January 2024
1) Make sure that you have installed the latest PC - DRIVERS FORCE
FEEDBACK driver on your PC
If necessary, you will find the driver for your device on our website, in the Drivers
section:
https://support.thrustmaster.com/product/t300rs/
Restart your computer to complete the update.
2) Plug the T300 RS power plug into a wall outlet
- DO NOT CONNECT the racing wheel to your PC’s USB before being
prompted to do so.
3) Make sure your T300 RS is in PC mode
- The sliding switch must be on PC or PS3
4) Simultaneously press and hold the L3 and R3 buttons
5) Connect the T300 RS directly to a PC USB port by holding down the L3 and
R3 buttons
- Wait about 3 seconds then release the L3 and R3 buttons.