AUTOMATIC CALIBRATION OF THE PEDAL SET
IMPORTANT
- Never connect or disconnect the pedal set from the base of the wheel when the wheel is
connected to the console or PC, or during gaming sessions, to avoid calibration problems.
= Always connect the pedal set to the wheel before connecting the wheel to the console or PC.
- Once the racing wheel’s calibration is complete and the game has been started, the pedals are
automatically calibrated after a few presses.
- Never press the pedals during the racing wheel's self-calibration phase or while a game is loading!
This could result in improper calibration.
- If your racing wheel and/or pedal set do not function correctly, or if they seem to be improperly
calibrated: Power off your console or PC and completely disconnect the racing wheel. Then
reconnect all cables (including the power supply cable and the pedal set), and restart your console
or PC and your game.
To Next Page
Loading...
