Thrustmaster TH8S Shifter Add-on - Mounting the Shifter on Surfaces

12
Mounting the shifter on a table, desk or
shelf
- Place the nose of the shifter on a table or other flat
surface.
Mounting is optimized for supports such as tables,
desks or shelves from 0.04 – 1.6” / 0.1 –
4 cm thick,
via the mounting clamp .
The mounting clamp  is not removable.
For use in a cockpit, install the shifter on the cock
pit’s
shelf using the mounting clamp .
0.04 – 1.6”
0.1 – 4 cm