TX Racing Wheel - Manual firmware update procedure (Windows®
10/11)
System requirements: PC running Windows® 10 or later.
1) Connect your TX Racing Wheel to one of your PC’s USB ports
Please be sure to follow these instructions:
- The power connector must be properly connected at the back of the racing
wheel’s base.
- The power plug must be connected directly to a wall outlet.
o We recommend that you avoid using an extension cord, power strip or
current transformer.
- The racing wheel must be connected directly to a USB port on your
o We recommend that you avoid using a USB hub, USB extension cable
or any other type of connection extension.
Make sure that you have equipped your TX Racing Wheel with an add-on wheel rim
before you power on the racing wheel.
During this procedure:
− DO NOT CONNECT OR DISCONNECT your TX Racing Wheel before being
prompted to do so.
2) If you have not done so already, download and install the latest PC -
DRIVERS FORCE FEEDBACK driver on your PC. [Package 2023_TTRS_3]
You will find the latest driver for your device on our website, in the Drivers section:
https://support.thrustmaster.com/product/txracingwheel/
Restart your computer to finalize the update.
To Next Page
Loading...
